[Impurity Control And Post‑weaving Adaptation Tips Of High Strength Polypropylene Yarn]
Release date:[17:39:05] Read a total of [1] time

High strength polypropylene yarn is produced by FDY one‑step spinning process. With light weight, good acid‑alkali resistance and stable strength under dry and wet conditions, high strength polypropylene yarn is widely used in flexible container bag slings, industrial webbing, safety rope nets and geotechnical products. In practical production, besides conventional indicators such as breaking tenacity, denier and elongation at break, impurity control of high strength polypropylene yarn exerts direct influence on weaving efficiency and finished‑product quality.


Impurities of high strength polypropylene yarn mainly include gel particles inside polymer melt, coke particles generated in spinning and tiny hard particles introduced from production environment. Without effective control, these impurities will wear thread‑guiding parts and trigger frequent yarn breakage during weaving. Defects will appear on webbing and net fabrics, raising defective rate. Melt filtration, process‑parameter optimization and production‑environment management are adopted to reduce particle impurities inside High strength polypropylene yarn.


Downstream processing equipment sets different requirements for purity of high strength polypropylene yarn. High‑speed weaving machines are sensitive to tiny particles, which may lead to frequent shutdown, while low‑speed rope‑net braiding equipment allows higher tolerance. For dope‑dyed High strength polypropylene yarn, gel spots caused by color‑masterbatch dispersion should be noticed. Proper melt‑filtration grade helps lower color‑spot defects.


When purchasing High strength polypropylene yarn, purchasers shall evaluate yarn purity according to loom speed and product grade, together with physical‑chemical test reports. Trial weaving is recommended to check yarn‑break frequency and fabric defects so as to verify compatibility of High strength polypropylene yarn with production lines. Appropriate raw material selection via sample test reduces shutdown loss and stabilizes quality of end‑products such as webbing and rope nets.

Relevant keywords:
Tel:0086-519-83783531     Cel:0086-13961177625      E-mail:jianglijing1022@126.com     Add:cheng zhang Jia zeTown Wujin District, Changzhou City, Jiangsu Province
All rights reserved Changzhou JunTai Chemical Fiber Co., Ltd. Technical support:China polypropylene network